Stainless steel drain plug for drive box and gearbox, includes recess for crush washer to locate in. Also used as level plug on big twins and front sump drain on small twins.

Also known as Guzzi ref. 95980212, 95980610. Use crush washer SIA10900 with this bolt

 More than 5 in stock

95980214-z 95980214 GU95980214 95 98 02 14
 9598 0214 9598.0214 95.98.02.14

One litre AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis

Mixes safely with other DOT 3 , DOT 4 and DOT 5.1 brake and clutch fluids. If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650

Please note this part CANNOT be posted outside of the UK mainland area.

See BRA99014 for high performance alternative

 More than 5 in stock

500ml AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis

Mixes safely with other DOT 3, DOT 4 and DOT 5.1 brake and clutch fluids.

See BRA99013 for high performance alternative.

If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650

Please note this part CANNOT be posted outside of the UK mainland area

 More than 5 in stock

Collet for exhaust manifold, two required per cylinder

 This part is due back in stock soon, call 01484 841395 to reserve yours

19025460-z 19025460 GU19025460 19 02 54 60
 1902 5460 1902.5460 19.02.54.60

Exhaust gasket, silencer bush or muffler gasket shim for exhaust joint between silencer and downpipe

2 exhaust bushes required per bike

 2 in stock

 91113826 GU91113826 91 11 38 26
 9111 3826 9111.3826 91.11.38.26

Pair of original chrome silencers with heat shields

Supplied with optional shims for Nevada 350

 This part is available by special order, request a quote

Stainless steel after market exhaust stud

M6 exhaust stud. See ENA31881 for stud nut. Note that unlike the originals these studs are threaded along their entire length.

 More than 5 in stock

 96506042 GU96506042 96 50 60 42
 9650 6042 9650.6042 96.50.60.42

Exhaust stud, see ENA96043 for less expensive alternative

See ENA31880 for stud nut

 This part is available by special order, request a quote

 96506042 GU96506042 96 50 60 42
 9650 6042 9650.6042 96.50.60.42

Aftermarket zinc coated exhaust stud with shorter plain section

See ENA31881 for stud nut and SSA96043 for a stainless steel alternative

 Availability varies on this part, check availability

 96506042 GU96506042 96 50 60 42
 9650 6042 9650.6042 96.50.60.42

Pair of FAC air assisted fork dampers. These are a major suspension upgrade for the front end of your bike and work best when combined with progressive fork springs SUA18601

Stainless steel damper rod and alloy top nut, supplied with fork top O ring. Pressurise to between 7 and 29 PSI. See OIA01001 for ATF (used in place of fork oil)

 This part is available by special order, request a quote

23526470-z 23526470 GU23526470 23 52 64 70
 2352 6470 2352.6470 23.52.64.70